120 Palisade DIY | Hardware Kit + Download
The 120 Palisade is a non-firearm, open source PDW chassis system designed to work with the 120R FCU. It delivers the compact size of a pistol while offering the versatility of an AR-style platform.
This is a DIY (Do-It-Yourself) hardware kit. For users who prefer a ready-made option, we also offer fully assembled units, manufactured from high-performance PA11 nylon using advanced Multi Jet Fusion (MJF) technology.
To build your 120 Palisade:
- Download the 3D-printable files.
- 3D Print the parts and assemble the PDW using the included hardware kit.
- Add your 120R FCU, slide, optic, magazines, sling, and any other accessories.
KEY FEATURES
- Spare Mag Storage | Forward mounted spare magazine well
- Manual Safety | Securely store in compartments or bags
- Stabilizing Brace | Compact, user deployable brace with 13.5in length of pull
- Full Size Grip | Comparable to 19X
- Gen4 Mag Releases | Reversible for the 13%
- QD Sling Point | Integrated rear facing QD sling point
- Front Accessory Rail | 1913 picatinny rail for lights, lasers, and other accessories
- Open-top Design | Works with most slide-mounted optics, iron sights, and rear cover plate accessories 😉
- Open-source Digital Files | DIY – Reference – Remix
COMPATIBILITY
- FCU: Â 120R sold separately
- Caliber/Slide: 9mm (19.3) | .40 Cal (23.3) | .357 Sig (32.3)
- Mag Catch: Gen4 (reversable)
- Magazines: 17 and larger | Gen1-4
- Muzzle Devices: Up to 1.375″ diameter
We strongly recommend a muzzle device to keep fingers safe and prevent injury
SPECIFICATIONS
- Dimensions: 12″ collapsed | 18.5″ extended | 1.8″ wide | 4.7″ high
- Length of Pull: 13.5″
- Weight: 10 oz (stripped)
- Materials: 6061 Anodized Aluminum | Stainless Steel
EACH PURCHASE INCLUDES
- Chassis Hardware Kit (assembly required)
- Brace Bar
- Spring
- Locking Bar
- Screws
- Safety Kit (assembly required)
- Safety Drum
- Coil Spring
- Ball Bearing
- Set Screw
- Red O-ring
DOWNLOAD PRINT FILES AND INSTRUCTIONS HERE
This listing only includes the aforementioned items for the non-firearm chassis system. It excludes the serialized frame or receiver (120R FCU), lower parts kit (LPK), slide, holster, sling, lights, red dot sights, or accessories shown in promotional images.
MADE IN USA
Shipping | Cannot be shipped to California, Maryland, or Massachusetts
Legal Compliance:
Purchasers must comply with all federal, state, and local laws, including the National Firearms Act (NFA), 26 U.S.C. § 5801 et seq. The brace configuration is not designed for shouldering. Using a stock with the Palisade requires registration as a Short-Barreled Rifle (SBR) per 26 U.S.C. § 5845(a)(3), defined as a rifle with a barrel under 16″ or overall length under 26″. G100 does not provide legal advice; verify compliance with all regulations before purchase or modification.
Disclaimer:
This product is offered as a Do-It-Yourself (DIY) hardware kit and requires users to download and 3D print specific components. Performance and fitment may vary significantly based on the user’s 3D printer, material choice, print settings, and assembly methods. Users are solely responsible for verifying the accuracy, integrity, and safety of all printed and assembled components.
Some parts may require manual fitting, sanding, or adjustment to achieve full functionality. Use of tools, adhesives, or modifications is at the user’s discretion and risk. Assembly and usage should be performed only by individuals with the appropriate skills and safety knowledge.
By using this kit, the user acknowledges and accepts full responsibility for all outcomes resulting from its fabrication, assembly, and use. The manufacturer and/or distributor makes no guarantees regarding performance, safety, or compatibility, and expressly disclaims all liability for any damages, injuries, or losses, whether direct, indirect, incidental, or consequential, arising from the use or misuse of this product.
